Description
The PS15 Loudspeaker can be safely driven with over 1000 Watts of amplifier power, yet it has a small volume and reduced weight. The dispersion, architecture and weight balance of the PS15 Loudspeaker are designed to provide both exceptional PA and stage monitor performance from a single product without compromise. This flexibility is realized by a proprietary constant directivity asymmetrical dispersion horn, easily rotated in four positions by the user. Coupled with the horn’s unique progressive horizontal (50° to 100°) and vertical (55°) dispersion, the most suitable pattern can be selected for vertical or horizontal PA usage or wedge monitoring. The 2-way passive 8 Ohm design uses a single amplifier channel to deliver bi-amped performance for less money, space and complexity.
The PS15 Loudspeaker System is the most powerful member of Nexo’s acclaimed PS Series; versatile, compact, full-range loudspeakers tailored for a wide range of touring and installed sound reinforcement applications. Like all Nexo products, the PS15 Loudspeaker and optional PS15Bass and LS1200 Subwoofer are designed to work with advanced electronic processors, guaranteeing consistent performance and reliability of the highest standard.
PRODUCT FEATURES
Components : LF 1 x 15″ (38 cm) 6 Ohm driver
HF 1 x 2″ throat, 3″ titanium diaphragm, driver + Low Distortion, Constant Directivity Asymmetrical
Dispersion Horn.
Height x Width x Depth 675 x 434 x 368 mm (26.63″ x 17.13″ x 14.5″)
Weight 29 kg (64 lbs)
Connectors 3 x NL4MP SPEAKON 4 pole; Passive In Passive Loop Thru, Active In
Construction Baltic Birch Ply finished with textured, polyurethane black coating
Fittings: Handles 2, integral to cabinet
Front finish Acoustic foam on perforated steel grille (77% transparent)
Flying Points 1 steel anchor point for flying track on top (9 positions)
2 steel anchor plates for flying track on bottom (3 positions)
Stand fittings Built in Stand Fitting, 35mm (1 3/8″)
Fixed Installation One set of 4 fixing points (Omnimount 100 Std spacing)
SYSTEM SPECIFICATIONS PS15 with PS15 TDController MkII
Frequency Response [a] 50 Hz – 18 kHz ±3dB (30 Hz – 19 kHz ±3dB with LS1200 Subwoofer)
Usable Range @-6dB [a] 47 Hz – 18 kHz (29 Hz – 18 kHz with LS1200 Subwoofer)
Sensitivity 1W @ 1m [b] 102 dB SPL Nominal – 99 dB SPL Wideband
Nominal Peak SPL @ 1m [b] 131 to 134 dB Peak (for 550 to 1200 W RMS Amp.)
HF Dispersion [c] 50 ° to 100° Hor. x 55° Vert. Rotatable Horn, 4 positions
Directivity : Q & DI [c] Q : 16 Nominal DI : 12 dB Nominal ( f > 1.5 kHz )
Crossover Frequencies 900 Hz Passive or Active (internally switchable)
Nominal Impedance Passive: 8 Ohms Active; LF 6 Ohms, HF 8 Ohms.
Recommended Amplifiers 550 to 1200 Watts into 8 Ohms for 1 x PS15; 1000 to 1800 Watts into 4 Ohms for 2 x PS15 per channel
SYSTEM OPERATION
Electronic Controller The PS15 Loudspeaker must be used with a Nexo Controller (PS15 TD MkII analogue or NX241 digital).
Use without a properly connected Controller will result in poor sound quality and may damage the
components.
